Yarilo PixelDIN - LED pixel controller

YARILO PIXEL DIN is designed to control LED pixel tapes. The device is connected to the local network and receives data via ArtNet or sACN* protocol. Different types of pixel tapes(1-Wire SPI, 2-Wire SPI) can be work simultaneously. Up to 4 independent outputs in 1-Wire SPI Mode. Total 5440 pixels.

Built-in web interface allows you to easily set parameters of the device and update firmware of the controller. The LED screen on the front panel indicates the current working mode and allows you to set basic settings.

Price: USD $142


Technical Specifications PixelDIN (pdf)

Firmware Update:


Main Specifications

Key Features

Control any type of pixel tape through all popular programs, front panel indication and quick setup through the built-in menu.

SPI Converter

PixelDin works as an SPI converter for all popular chips with frequencies up to 20 MHz. Supply voltage is from 5 to 24VDC.

Flexible port configuration

Each port works independently of the each other. Use 1-Wire and 2-Wire pixels together.

Supported LEDs

APA102, APA104, SK6822, TM1812, TM1814, TM1829, UCS1903, UCS9812S, WS2801, WS2811, WS2812, WS2812B, WS2813, WS2815**

Manual adjustment of LED IC timings Supports 16 Universes

Up to 4 independent outputs. Each output is capable of outputting up to 1360 RGB pixels. A total of 5,440

DIN Rail Mounting

Sync support

The device supports ArtSync and Madrix® Post Sync modes. Automatic synchronization mode also is supported.

Ease of use

The device is ready to work in a couple of seconds after powering on. Any parameters can be set up through the built-in WEB interface and the firmware can be easily updated.

Technical Specifications

Power Supply: 5-24В. Wiring options:
a) Feeding the flexible tapes through the device, max 2x4A = 8A
b) powering the device through the LED ports
c) powering the controller and the tapes with different voltages (connection of earth wires is mandatory)

Reverse polarity protection: Yes

Power Consumption: 2 W

Network Protocol: Art-Net, Streaming ACN*

Supported LEDs: APA102, APA104, SK6822, TM1812, TM1814, TM1829, UCS1903, UCS9812S, WS2801, WS2811, WS2812, WS2812B, WS2813, WS2815**

Input port: Ethernet RJ45 10/100Mbit (compatible с 1 GBit LAN)

Output ports: 4 outputs via screw terminals. Maximum of 1360 RGB pixels per output. Total of 5,440 pixels

Case Material: ABS plastic

Dimensions: 53,3x90,2x56,5 mm

Weight: 87 g

Operating Temperature: 0-50°C

Maximum ambient temperature: 40°С

IP Rating: IP20

Certification: EAC

* expected in mid-2021
** more pixels in newer firmware