Yarilo PixelGO - LED pixel controller

YARILO PIXEL GO is designed to control LED pixel tapes. The device is connected to the local network and receives data via ArtNet protocol. Different types of pixel tapes(1-Wire SPI, 2-Wire SPI) can be work simultaneously. Up to 2 independent outputs in 1-Wire SPI Mode. Total 2720 pixels.

Built-in web interface allows you to easily set parameters of the device and update firmware of the controller. The LED indicates the current working mode.


Price: USD $106


Download:
User manual PixelGO (pdf)


Firmware version 0.3.1

Main Specifications

Key Features

Control any type of pixel tape through all popular programs, front panel indication and quick setup through the built-in menu.

SPI Converter

PixelGO works as an SPI converter for all popular chips with frequencies up to 10 MHz. Supply voltage is from 5 to 12VDC.

Flexible port configuration

Each port works independently of the each other. Use 1-Wire and 2-Wire pixels together.

Supported LEDs

APA102, APA104, SK6822, TM1812, TM1814, TM1829, UCS1903, UCS9812S, WS2801, WS2811, WS2812, WS2812B, WS2813, WS2815**

Manual adjustment of LED IC timings Supports 16 Universes

Up to 2 independent outputs. Each output is capable of outputting up to 1360 RGB pixels. A total of 2,720

Sync support

The device supports ArtSync and Madrix® Post Sync modes. Automatic synchronization mode also is supported.

Ease of use

The device is ready to work in a couple of seconds after powering on. Any parameters can be set up through the built-in WEB interface and the firmware can be easily updated.

Technical Specifications

Power Supply: 5-12V. Powering the device through the LED ports

Reverse polarity protection: Yes

Power Consumption: 3W

Network Protocol: Art-Net

Supported LEDs: APA102, APA104, SK6822, TM1812, TM1814, TM1829, UCS1903, UCS9812S, WS2801, WS2811, WS2812, WS2812B, WS2813, WS2815*

Input port: Ethernet RJ45

Output ports: 2 outputs via screw terminals. Maximum of 1360 RGB pixels per output. Total of 2,720 pixels

Case Material: Anodized aluminium

Dimensions: 84x25x25 mm

Weight: 75 g

Operating Temperature: 0-50°C

Maximum ambient temperature: 40°С

IP Rating: IP20

Certification: EAC

* more pixels in newer firmware